| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| 12 string -body shape http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=15165 |
Page 1 of 1 |
| Author: | bob J [ Sat Dec 29, 2007 12:28 am ] |
| Post subject: | |
Is there a body shape most commonly used for a 12 string, Thanks gang, |
|
| Author: | Jim Kirby [ Sat Dec 29, 2007 1:10 am ] |
| Post subject: | |
They come in all flavors. I find jumbos to be the most aesthetically pleasing, although if I were to start one today, I'd probably use the OLF SJ design as a starting point. My own 12 is a Guild 412. |
|
| Author: | FishtownMike [ Sat Dec 29, 2007 11:07 am ] |
| Post subject: | |
I have searched for twelve string slothead tuners for a guitar i have that could use a new set and they are not to be found. I have found old used ones on ebay but their most likely beatup too. |
|
| Author: | martinedwards [ Sat Dec 29, 2007 8:00 pm ] |
| Post subject: | |
I've started a mini-jumbo shaped walnut/engleman one.... |
|
| Author: | Alan Carruth [ Sun Dec 30, 2007 12:58 am ] |
| Post subject: | |
I've always used a 17" Jumbo for 12s, figuring that treble would be no problem with the octave strings, and going with a shape that favors the bass. I'm not a big fan of Dreads myself, as I feel the tone is not as complex as I'd like, and tends to lack midrange. I bet a 16" SJ would work well too, and be easier to hold. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|